Dot Origin VTAP100 Manual de instalación - Página 7
Navegue en línea o descargue pdf Manual de instalación para Hardware de red Dot Origin VTAP100. Dot Origin VTAP100 13 páginas. Desktop usb reader
También para Dot Origin VTAP100: Manual de instalación (16 páginas), Manual de instalación (17 páginas)
Imprimir página3 Mechanical installation
The VTAP100 unit for OEM integration comprises a PCB with an integral antenna.
WARNING: Observe all
There is more detailed information in the next section about how to fit the VTAP100 unit inside the
Optional wallbox
3.1 Power
Connect the PCB to a PC using only a MicroUSB to USB cable, or the optional captive USB cable, if
any. (Never connect both at the same time).
The VTAP100 is rated at 5V DC @ 50 to 150mA for power over USB.
3.2 Environment
The VTAP100 must be stored and operated under the following conditions:
Ambient temperature 0 to +50degC
l
Humidity 0 to 95% RH non-condensing
l
Pressure 86-106kPa
l
VTAP100-OEM V3A INSTALLATION GUIDE
Figure 3-1 VTAP100 components
Safety instructions
case, if used.
when installing the VTAP100 PCB.
PAGE 3