Dot Origin VTAP100 설치 매뉴얼 - 페이지 7
{카테고리_이름} Dot Origin VTAP100에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dot Origin VTAP100 13 페이지. Desktop usb reader
Dot Origin VTAP100에 대해서도 마찬가지입니다: 설치 매뉴얼 (16 페이지), 설치 매뉴얼 (17 페이지)
페이지 인쇄3 Mechanical installation
The VTAP100 unit for OEM integration comprises a PCB with an integral antenna.
WARNING: Observe all
There is more detailed information in the next section about how to fit the VTAP100 unit inside the
Optional wallbox
3.1 Power
Connect the PCB to a PC using only a MicroUSB to USB cable, or the optional captive USB cable, if
any. (Never connect both at the same time).
The VTAP100 is rated at 5V DC @ 50 to 150mA for power over USB.
3.2 Environment
The VTAP100 must be stored and operated under the following conditions:
Ambient temperature 0 to +50degC
l
Humidity 0 to 95% RH non-condensing
l
Pressure 86-106kPa
l
VTAP100-OEM V3A INSTALLATION GUIDE
Figure 3-1 VTAP100 components
Safety instructions
case, if used.
when installing the VTAP100 PCB.
PAGE 3