Dafra DRPB48 Manual de instrucciones - Página 6

Navegue en línea o descargue pdf Manual de instrucciones para Herramientas Dafra DRPB48. Dafra DRPB48 10 páginas. Pneumatic blind rivet setting tool

DRPB48 Operation Manual

4) Disassemble clamping sleeve (#3):

5) Take out the 3-jaw set (#4) from the clamping sleeve (#3), then remove the assembly pusher

(#5) and the pusher spring (#6) from the tool. Once removed, inspect all parts for wear

before cleaning and replacing them. Any damaged parts should be replaced at this time.

6) Re-assemble the cleaned or replacement parts.

assembly pusher (#5) and insert it back to the tool where assembly oil cylinder (#11) is

located;

7) Place the 3-jaw set (#4) into the clamping sleeve (#3) and be sure that all 3 jaws are seated

in the correct position;

Put the pusher spring (#6) onto the