Dafra DRPB48 Manuel d'utilisation - Page 6
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Dafra DRPB48. Dafra DRPB48 10 pages. Pneumatic blind rivet setting tool
Imprimer la pageDRPB48 Operation Manual
4) Disassemble clamping sleeve (#3):
5) Take out the 3-jaw set (#4) from the clamping sleeve (#3), then remove the assembly pusher
(#5) and the pusher spring (#6) from the tool. Once removed, inspect all parts for wear
before cleaning and replacing them. Any damaged parts should be replaced at this time.
6) Re-assemble the cleaned or replacement parts.
assembly pusher (#5) and insert it back to the tool where assembly oil cylinder (#11) is
located;
7) Place the 3-jaw set (#4) into the clamping sleeve (#3) and be sure that all 3 jaws are seated
in the correct position;
Put the pusher spring (#6) onto the