Dafra DRT510 Manual de instrucciones - Página 4

Navegue en línea o descargue pdf Manual de instrucciones para Herramienta eléctrica Dafra DRT510. Dafra DRT510 6 páginas.

Imprimir página
DRT510 Operation Manual
Setting a rivnut.
1. Wind a rivnut onto the mandrel until it
comes into contact with the nose tip.
If the tool is setup correctly, you
should see 1 mandrel thread
protruding from the end of the rivnut.
With the tool facing as pictured, put
2.
the ratchet switch in the UP position.
Insert the tool with the rivnut on the
mandrel into the pre-prepared hole in
your work piece.
PAGE 4