Dafra DRT510 Руководство по эксплуатации - Страница 4

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Электроинструмент Dafra DRT510. Dafra DRT510 6 страниц.

Печатать страницу
DRT510 Operation Manual
Setting a rivnut.
1. Wind a rivnut onto the mandrel until it
comes into contact with the nose tip.
If the tool is setup correctly, you
should see 1 mandrel thread
protruding from the end of the rivnut.
With the tool facing as pictured, put
2.
the ratchet switch in the UP position.
Insert the tool with the rivnut on the
mandrel into the pre-prepared hole in
your work piece.
PAGE 4