Baumer DENEX Edge Detector II Manual del usuario - Página 9

Navegue en línea o descargue pdf Manual del usuario para Accesorios Baumer DENEX Edge Detector II. Baumer DENEX Edge Detector II 20 páginas.

4.2

DIP-Switch Settings

An 8-pole DIP-switch can be reached via the lid on top of the sensor. Unscrewing the

screw opens the lid.

The software functions can be controlled via the DIP switches.

DIP-Switch positions

= OFF

= ON

DIP-switches 1-4 are reserved for factory.

DIP-switches 5-8 are for selecting operation mode

All in OFF-position is the default setting.

DIP-Switches

5 6 7 8

Mode 0 =

Default

Mode 1

Mode 2

Mode 3

Mode 4

Mode 5

Mode 6

Mode 7

Mode 8

Mode 9

Mode 10

Mode 11

Laser power save mode is activated in all Counting/newspaper modes.

This means the laser power will be reduced to 50% after a 60 seconds gap.

User Manual DENEX Edge Detector II

Version 2013-02, V1.6

Commercial products: For timing applications, Blocking 15%, Output 5 ms

Counting application: Blocking time 30%, Output 5 ms

Timing application: Blocking time 15%, Output: 20 ms

Counting mode: Blocking time 15%,Otput: 20 ms

Newspapers, Blocking time 30%, Output: 20 ms

Edge detecting: Blocking time 15%, Output: 5 ms

Edge detecting: Blocking time 15%, Output: 20 ms

Cut edge first mode: Blocking time 46 %, Output 20 ms

Counting mode: Fixed blocking time = 7 ms, Output 5 ms.

Commercial: No Blocking, Output 5 ms

reserved

www.baumer.com

9/20

Baumer Electric AG

Frauenfeld, Switzerland