Doughpro DP1300 Manual de montaje - Página 2

Navegue en línea o descargue pdf Manual de montaje para Herramienta eléctrica Doughpro DP1300. Doughpro DP1300 3 páginas. Rebuilding piston assembly air driven automatic dough press

Imprimir página

REBUILDING PISTON ASSEMBLY DP1300

ILS 1.1

3) REMOVE BLACK AIR HOSE

REMOVE CLEAR HOSE

4) MARK PISTON & PISTON COVER

TO LINE UP GUIDE WHEN

RE-ASSEMBLY WITH MARKER AS

SHOWN.

5) UNSCREW 12 SOCKET HEAD

SCREWS FROM PISTON COVER.

ILS 1.3

20281 Harvill Ave, Perris, CA 92570 Toll Free: (800) 624-6717 Fax: (951) 657-4594 REBUILDING PISTON ASSEMBLY DP1300

1) IMPORTANT: DISCONNECT

ELECTRICAL AND AIR SUPPLY

PRIOR TO SERVICE.

2) REMOVE SILICONE

3) UNSCREW FOUR SET SCREWS ON

PIVOT ARM.

(2 OUTER SCREWS & 2 INNER SCREWS)

INNER SCREWS LOCATED BEHIND OUTER SCREWS

ILS 1.2

6) UNSCREW LONG SOCKET HEAD

SCREW AT THE CENTER OF THE

PLATE.

7) USE 2 OF THE 3/8 SOCKET HEAD'S &

CHANNEL TO REMOVE PISTON'S

PLATE.

8) CLEAN ALL GREASE AND DIRT

OUT.

(USE WD-40 OR MINERAL SPIRITS)

9) CHECK FOR CRACKS, IF SO, NEED

TO REPLACE PART.

20281 Harvill Ave

Perris, CA 92570

Toll Free: (800) 624-6717

Fax: (951) 657-4594