Doughpro DP1300 Manuale di montaggio - Pagina 2

Sfoglia online o scarica il pdf Manuale di montaggio per Utensile elettrico Doughpro DP1300. Doughpro DP1300 3. Rebuilding piston assembly air driven automatic dough press

Stampa la pagina

REBUILDING PISTON ASSEMBLY DP1300

ILS 1.1

3) REMOVE BLACK AIR HOSE

REMOVE CLEAR HOSE

4) MARK PISTON & PISTON COVER

TO LINE UP GUIDE WHEN

RE-ASSEMBLY WITH MARKER AS

SHOWN.

5) UNSCREW 12 SOCKET HEAD

SCREWS FROM PISTON COVER.

ILS 1.3

20281 Harvill Ave, Perris, CA 92570 Toll Free: (800) 624-6717 Fax: (951) 657-4594 REBUILDING PISTON ASSEMBLY DP1300

1) IMPORTANT: DISCONNECT

ELECTRICAL AND AIR SUPPLY

PRIOR TO SERVICE.

2) REMOVE SILICONE

3) UNSCREW FOUR SET SCREWS ON

PIVOT ARM.

(2 OUTER SCREWS & 2 INNER SCREWS)

INNER SCREWS LOCATED BEHIND OUTER SCREWS

ILS 1.2

6) UNSCREW LONG SOCKET HEAD

SCREW AT THE CENTER OF THE

PLATE.

7) USE 2 OF THE 3/8 SOCKET HEAD'S &

CHANNEL TO REMOVE PISTON'S

PLATE.

8) CLEAN ALL GREASE AND DIRT

OUT.

(USE WD-40 OR MINERAL SPIRITS)

9) CHECK FOR CRACKS, IF SO, NEED

TO REPLACE PART.

20281 Harvill Ave

Perris, CA 92570

Toll Free: (800) 624-6717

Fax: (951) 657-4594