Baumer PMG10P Instrucciones de montaje y funcionamiento - Página 14

Navegue en línea o descargue pdf Instrucciones de montaje y funcionamiento para Media Converter Baumer PMG10P. Baumer PMG10P 32 páginas. Absolute encoder
También para Baumer PMG10P: Instrucciones de montaje y funcionamiento (32 páginas), Instrucciones de montaje y funcionamiento (36 páginas), Manual de instrucciones (44 páginas), Manual de instrucciones (44 páginas), Manual de instrucciones (40 páginas), Manual de instrucciones (40 páginas), Manual de instrucciones (40 páginas), Manual de instrucciones (36 páginas)

MOUNTING

4.3

Maximum permissible mounting tolerance when the Baumer Hübner K 35 spring

disk coupling is used

Devices with a solid shaft should be driven through the Baumer Hübner K 35 spring disk

coupling (accessory), that can be pushed onto the shaft without axial loading�

The figure below shows the device with EURO flange B10, the same maximum

permissible mounting tolerances are valid with housing foot B3�

)

The device must be mounted on the drive with the least possible angular error and

parallel misalignment�

)

Risk of damaging the ball bearings

Coupling components must not be driven onto the shaft with improper force (e� g�

hammer impacts), because of the risk of damaging the ball bearings�

Admissible

parallel misalignment

* With insulated hub

All dimensions in millimeters, unless otherwise stated�

14/32

2-10

Admissible

angular error

MB261EN - 11196414, 21A1, Baumer_PMG10-Inc_EN_202103_MI_11196414

Admissible

axial movement

±0.7 (±0.3*)