Combi F72 Manual de instrucciones y manual de inspección - Página 7

Navegue en línea o descargue pdf Manual de instrucciones y manual de inspección para Bebé & Muebles para niños pequeños Combi F72. Combi F72 8 páginas. Baby keep fit

Imprimir página

B. Checking Missing or Loosening of Various Screws (when corner bracket is used)

*The corner bracket is sold separately.

Inspection Points

Corner cover fixing screws (2 locations)

❹

Corner bracket fixing screws (4 locations)

❺

Anchor bolts (3 locations)

Main unit fixing screws (4 locations)

Bottom cover fixing screws (2 locations)

❹ Checking Corner Cover Fixing Screws and Corner Bracket Fixing Screws.

①

Use a back cushion and a flat-head screwdriver to

remove the plastic caps (2 pcs), then use a Phillips

screwdriver No3 to remove the lower cover fixing

screws (2 locations ) and remove the lower cover.

*To disassemble the back cushion, refer to "Back

Cushion Replacement Procedure" on page 9.

Back cushion

Bottom cover fixing screws

(2 locations)

Plastic cap (2 pcs)

③

Use a Phillips screwdriver No2 to check the

corner cover fixing screws (2 locations) and

corner bracket fixing screws (4 locations) are

not missing or loosened.

❺ Checking Anchor Bolts, Body Fixing Screws, and Lower Cover Fixing Screws.

After checking, assemble by the reverse procedure.

When assembling, make sure that anchor bolts (3 locations), main unit fixing screws (4 locations), and lower cover

fixing screws (2 locations) are not missing or loosened.

After the assembly is completed, inspect it by referring to the Daily Inspection (page 4).

Use Phillips screwdriver No3 and wrench (nominal 17MM)

C. Checking Appearance (Metal Parts)

Inspection Points

❻

Deformation or rust of main body frame

Missing, loss, deformation, rust of screws

❼

and metal fittings

D. Entering Inspection Date

After the periodic inspection, enter the inspection

date on the inspection sticker affixed to the lower

cover.

Inspection Method

Visual, Touch

(Phillips screwdriver No2)

Visual, Touch

(Phillips screwdriver No3,

spanner (nominal 17MM))

②

Body fixing screws

(4 locations)

Bottom cover

Corner cover fixing

screws (2 locations)

Back side of

the main unit

Inspection Method

Visual

Inspection sticker

(Inspection S for 1-year silver)

Judgment Criteria

No missing or looseness

Using a Phillips screwdriver No3 to remove the main body

fixing screws (4 locations) and use wrench (nominal

17mm) to remove the anchor bolts (3 locations) driven

into the floor, and then remove the main body from the

corner bracket.

Corner cover

Judgment Criteria

No deformation or rust

No disconnection, loss,

deformation, or rust

Handling of Defects

Retightening

Main body

Corner bracket

Anchor bolts

(3 locations)

Corner bracket

fixing screws

(4 locations)

Handling of Defects

Discontinuation

of use

Replacement