Dowco 44117 Series Instrucciones de instalación - Página 2
Navegue en línea o descargue pdf Instrucciones de instalación para Equipamiento náutico Dowco 44117 Series. Dowco 44117 Series 2 páginas. 2012-18 bimini top mako pro 17 skiff cc
Imprimir páginaBUTTON LOCATION AND MOUNTING
STEP 1
Install the deck buttons and eye straps on top of the gunwale. Starting at the center of aft cleat, measure forward 44 1/2" for the main frame
button location. Then measure 36 1/2" back for the hold down arm button location. Measure 40" foward for the eye strap.
STEP 2
Center buttons at each mark - use center punch to mark.
STEP 3
Use a 1/4" drill to install the main frame deck button and the hold down arm button (Detail A). Use a 5/32" drill for the eye strap. Do not ever
size the holes for the eye strap.
STEP 4
Install the frame on the buttons. Two people may be required to prevent damage to the boat.
STEP 5
Attach the web straps to the front of the frame per Figure 2 and secure to the straps to the eye straps installed on the gunwale.
NOTE:
Extra care should be taken when drilling into the fiberglass gunwale. After the holes are drilled, take a phillips head screwdriver and lightly chamfer the
outer edge of the hole. Failure to chamfer the holes will result in cracking and chipping of the fiberglass finish.
FIG. 1
STOWING THE TOP
This frame can only be stored in an aft radar arch position. It is not recommended to store the frame and top in a fully down position.
CAUTION:
Do not stow top while wet.
Dowco Marine, Inc. | 1610 Frisco Road, Lebanon MO 65536 | dowcomarine.com | (800) 404-5252
WRAP AROUND FRAME
WARNING:
Do not trailer boat with top in radar arch position.
AND TIGHTEN
140322-00 | 02/19