Caraudio-Systems c.LOGiC C2-CIC Manual - Página 8
Navegue en línea o descargue pdf Manual para Electrónica del automóvil Caraudio-Systems c.LOGiC C2-CIC. Caraudio-Systems c.LOGiC C2-CIC 13 páginas. For bmw professional navigation systems with idrive and 6.5”/8.8” monitor
Imprimir página3.3.
Quadlock connector
Disconnect female Quadlock connector from the back of the navigation computer.
Remove MOST® insert from the factory harness female Quadlock connector.
Plug MOST® insert into male MOST® connector shell of harness C3C-BMW0x.
Plug male Quadlock socket of harness C3C-BMW0x into female Quadlock connector
of vehicle harness
Plug male MOST® connector into female MOST® socket of C3C-BMW0x.
Plug female Quadlock connector of C3C-BMW0x into male Quadlock socket of the
navigation computer.
Note: Vehicles without MOST® components, which means without factory CD-changer,
without factory phone or other MOST® components have optical wires at the navigation
computer, but it can be possible that the optical ring is not closed at the diagnostic
connector in the glove compartment. In this case a connector bridge for optical wires is
necessary.
3.4.
Connecting peripheral devices
It is possible to connect up to 2 after-market AV-sources, after-market rear-view camera and
rear-seat-entertainment to the c.LOGiC interface.
Before final installation of the peripheral devices, we recommend to test-run the c.LOGiC
functions to detect incompatibility of vehicle, navigation, factory accessories or peripheral
devices as soon as possible.
Version 22.03.2011
C2-CCC/C2-CIC