Follett 110CT425A Manual de instalación - Página 3

Navegue en línea o descargue pdf Manual de instalación para Dispensador Follett 110CT425A. Follett 110CT425A 17 páginas. Ice and water dispenser

Imprimir página

Specifications

Electrical

§ Freestanding and countertop models (110FB425A/W, 110CT425A/W) require a dedicated circuit.

Basic electrical: 115 V/60 Hz/1 phase

§ Dispensers and ice machines are supplied with 7-foot power cord with NEMA 5-15 hospital-grade plug. Connect

to a dedicated 15A circuit.

Model

110FB425A/W

110CT425A/W

Ambient

Air temp*

Water temp

†

Water pressure (psi/bar)

Ambient air temperature is measured at the air-cooled condenser coil inlet.

†

Ambient water temperature is measured in the ice machine reservoir.

Plumbing

Dispenser drain

Ice machine drain

Dispenser water inlet

Ice machine water inlet

Cond. inlet – w/c only

Cond. drain – w/c only

Note: Water shut-off recommended within 10 ft (3 m) of dispenser. Drain to be hard-piped and insulated. Maintain at

least 1/4" per foot (20 mm per 1 m) run of slope.

Ventilation clearances

§ 110CT425A/W: 6" (15.2 cm) required at top.

Note: 6" (15.2 cm) at each side advised for service.

§ 110FB425A/W: 4" (10.2 cm) required at rear .

Note: 12" (30.5 cm) at top advised for service.

Approximate shipping weight

§ 290 lb (132 kg), base stand: 140 lb (64 kg)

Total system

11.0A

Electrical connection

cord & plug provided

100 F/38 C Max.

50 F/10 C Min. (Best performance below 80 F/27 C)

90 F/32 C Max.

45 F/7.2 C Min. (Best performance below 70 F/21 C)

70/5 Max.

10/0.7 Min.

110CT with integral ice

machine

3/4" MPT

3/4 MPT

3/8" FPT

Max. circuit

20A

Circuits required

115/60/1, 15A max. fuse size

110FB with ice machine

in base

3/4" MPT

3/8" FPT

—

3/8" FPT

110CT425A/W, 110FB425A/W