Carco 30B Manual de instalación - Página 9

Navegue en línea o descargue pdf Manual de instalación para Tractor Carco 30B. Carco 30B 11 páginas. For ji case 650k/750k/850k

CONTROL GROUP

INSTALLATION INSTRUCTIONS

1. Observe general service methods and safety precau-

tions given in Case / New Holland tractor service

manual.

2. Access to space below operator platform may be

gained by tilting the operator platform per the tractor

service manual.

3. Assemble the winch controller as shown in Detail C.

Leave the control handle loose. NOTE: A) It may be

easier to install the rubber bushing (item 28) by

removing the knob and slipping the bushing over the

small threads at the top end of the rod. B) The cap-

screws and washers (items 8 & 9) are loose, but cap-

tured in their holes by the top of the valve body.

4. Remove the top plastic cover from the RH tractor con-

sole.

5. For EROPS machines only, remove the ashtray, steel

ashtray opening surround, and cigar lighter assembly

from the plastic console cover.

6. With a 3 in. (76 mm) hole saw, cut the opening in the

console top steel plate, as defined. Drill the mounting

holes using a 7/16 in. (12 mm) drill bit. NOTE: A)

Dimensions are measured from the start of the indi-

cated bend in the console top plate. B) On EROPS

tractors only, it will be necessary to trim the foam insu-

lation away from the winch controller mounting area

on both the top and bottom of the console top plate.

7. Install the winch controller assembly into the tractor

console opening using nuts and washers (items 9 &

10).

CONTROL GROUP