Carco 30B Руководство по установке - Страница 9

Просмотреть онлайн или скачать pdf Руководство по установке для Трактор Carco 30B. Carco 30B 11 страниц. For ji case 650k/750k/850k

CONTROL GROUP
INSTALLATION INSTRUCTIONS
1. Observe general service methods and safety precau-
tions given in Case / New Holland tractor service
manual.
2. Access to space below operator platform may be
gained by tilting the operator platform per the tractor
service manual.
3. Assemble the winch controller as shown in Detail C.
Leave the control handle loose. NOTE: A) It may be
easier to install the rubber bushing (item 28) by
removing the knob and slipping the bushing over the
small threads at the top end of the rod. B) The cap-
screws and washers (items 8 & 9) are loose, but cap-
tured in their holes by the top of the valve body.
4. Remove the top plastic cover from the RH tractor con-
sole.
5. For EROPS machines only, remove the ashtray, steel
ashtray opening surround, and cigar lighter assembly
from the plastic console cover.
6. With a 3 in. (76 mm) hole saw, cut the opening in the
console top steel plate, as defined. Drill the mounting
holes using a 7/16 in. (12 mm) drill bit. NOTE: A)
Dimensions are measured from the start of the indi-
cated bend in the console top plate. B) On EROPS
tractors only, it will be necessary to trim the foam insu-
lation away from the winch controller mounting area
on both the top and bottom of the console top plate.
7. Install the winch controller assembly into the tractor
console opening using nuts and washers (items 9 &
10).
9
CONTROL GROUP