Bosch Ascenta SHE5AM02UC Instrucciones de reparación - Página 43

Navegue en línea o descargue pdf Instrucciones de reparación para Lavavajillas Bosch Ascenta SHE5AM02UC. Bosch Ascenta SHE5AM02UC 50 páginas. Quick reference instructions
También para Bosch Ascenta SHE5AM02UC: Manual de instrucciones de instalación (21 páginas), Manual de energía (2 páginas), Comenzar (2 páginas), Instrucciones de reparación (27 páginas)

6.3

Troubleshooting

6.3.1

Dishwasher won't start

6.3.1.1 Door ajar or faulty door latch

The dishwasher won't start if the door isn't closed securely. Push

the door closed until the door latch closes (i.e. until the latch

clicks). If the dishwasher starts, educate the customer on closing

the door securely.

If the dishwasher won't start when the door has been securely

closed, check the door latch with a magnet. Hold the magnet

over the Hall Effect sensor (located just left of the left screw) – if

the dishwasher starts, the sensor didn't sense the door latch

magnet.

Occasionally a door can catch on the door seal and not close

securely. If the door or door seal is misaligned, realign it. If the

door latch is broken, replace it.

702_58300000130262_ara_en_c

6.3.1.2 Disabled or faulty pumps

If the dishwasher won't start, check if the following parts are

disconnected or disabled. If they aren't connected, reconnect

them. If faulty, replace them.

 Heat pump

 Drain pump

Dishwasher controls run safety checks – if drain pumps or heat

pumps are disconnected, dishwashers will NOT run.

6.3.2

Protection of heater if there's no water

Two NTC's protect the heater. Both NTC's are checked by the

control – if they overheat, the control shuts down the dishwasher

(E:08 error code). The dishwasher shuts down if only one NTC

returns a signal (E:12 error code) or if they show different values

(E:11 error code).

Page 43 of 50