Bosch Ascenta SHE5AM02UC Instrucciones de reparación - Página 44

Navegue en línea o descargue pdf Instrucciones de reparación para Lavavajillas Bosch Ascenta SHE5AM02UC. Bosch Ascenta SHE5AM02UC 50 páginas. Quick reference instructions
También para Bosch Ascenta SHE5AM02UC: Manual de instrucciones de instalación (21 páginas), Manual de energía (2 páginas), Comenzar (2 páginas), Instrucciones de reparación (27 páginas)

6.3.3

Heat pump terminal measurements

There are two connectors, 7-pin and 3-pin.

6.3.3.1 7-pin connector (heater / NTC's / pump ground)

The 7-pin connector connects to the heat pump heater, NTC's

and ground.

Pump

Motor

6.3.3.2 3-pin connector (3-pole BLDC motor)

The 3-pin connector connects to the 3-pole BLDC motor. The

power control module controls motor speed, starting and

stopping.

702_58300000130262_ara_en_c

7 – NTC 1

6 – NTC common

5 – NTC 2

4 – Line (hot)

3 – X1 (heater common)

2 – Neutral

1 – Ground

6.3.4

Drain pump

There is a single 3-pin connector,

connecting to the 3-pole BLDC

pump motor.

Resistances as follows:

1 – 2: 90 Ω (@ 72 ºF)

2 – 3: 90 Ω (@ 72 ºF)

3 – 1: 90 Ω (@ 72 ºF)

6.3.5

Error code E:25 from loose drain pump cover

If a dishwasher doesn't drain properly and / or shows an E:25

error code, the problem could be the drain pump cover wasn't

replaced properly (i.e. not completely seated and locked into

position). Loose drain pump covers allow more water flow to the

drain pump, increasing the pump load, drawing more current and

causing an E:25 error code.

The Clean light can come on, giving the impression the

dishwasher finished it's cycle when it actually didn't.

Occasionally E:23 and E:24 error codes can occur as well.

1. Drain pump cover

Page 44 of 50