Airssential Home AiroMax AI-MAX Manual de instrucciones - Página 11

Navegue en línea o descargue pdf Manual de instrucciones para Equipamiento médico Airssential Home AiroMax AI-MAX. Airssential Home AiroMax AI-MAX 16 páginas.

Imprimir página

Troubleshooting

Check the following if the device should fail during operation.

Problem

Compressor does

not work after

being turned on.

The medication

does not nebulise.

No nebulisation or

low nebulisation

rate.

The compressor

becomes very

hot.

Disposal

Waste electrical products should not be disposed of with household waste.

If this compressor is no longer required or it is no longer serviceable, dispose

of the device and its accessories in compliance with local regulations.

Please recycle where facilities exist. Check with your local Council for

recycling information.

Possible Cause

The power plug is

incorrectly inserted into the

power socket.

The blue conduction cone

is missing from the

nebuliser bowl.

The nebuliser bowl is

incorrectly assembled or

is tilted at an angle greater

than 45°.

The air-tubing is incorrectly

attached to the compressor,

is bent or damaged.

Too much or too little

medication in the nebuliser

bowl.

The compressor's ventilation

slots are covered or

obstructed.

Solution

Switch off the device ("O") and insert

the power plug properly into the

power socket. Do not use extension

cords etc.

Re-assemble the nebuliser bowl to

include the conduction cone.

Add more medication (2mL

minimum) into the nebuliser bowl.

Follow the Instructions for Use.

Ensure that the nebuliser bowl is not

tilted at an angle greater than 45°.

Check the connection of the air-

tubing to the compressor and the

nebuliser bowl. The air-tubing must

not be kinked or bent. Replace the

air tubing if it is damaged.

Check to ensure the correct amount

of medication is in the nebuliser

bowl.

Note: Medication bowl capacity is

between 2 - 8mL.

Do not obstruct or cover the

compressor's vents during use

AiroMax

Nebuliser System