DRAKE DSE 2 PLUS Manual de instrucciones - Página 6
Navegue en línea o descargue pdf Manual de instrucciones para Media Converter DRAKE DSE 2 PLUS. DRAKE DSE 2 PLUS 20 páginas. Dual hd digital signage encoder
También para DRAKE DSE 2 PLUS: Manual de instrucciones (20 páginas)
Imprimir página
General Description
The DSE 2 PLUS encodes up to two uncompressed programs from devices with HDMI (non HDCP
encrypted), High-Resolution Component Video, Composite or VGA outputs. The DSE 2 PLUS encodes the
incoming programs to MPEG2 or MPEG4/H.264 compressed video. An internal multiplexing QAM
modulator and low-noise upconverter allows programs to be combined with existing digital and or
analog programming.
Features
•
Receives High-Resolution Component, VGA, or HDMI (non-HDCP content-protection) From Two
Separate Video Sources
•
Video Encodes to MPEG2 or MPEG4/H.264
•
Supports 480i, 480p, 720p, or 1080i video resolution
•
Audio Encoding to Dolby Digital® or MPEG1-Layer 2
•
Supports Closed Captioning
•
High Level (+45 dBmV) agile output programmable from 5 to 1,000 MHz using STD, HRC, IRC,
and Broadcast channel plans
•
GUI-based Remote Network Control and Monitoring
Installation and Mounting
The DSE 2 Plus is designed to be installed in a standard 19'' rack.
Adequate ventilation is very important in multichannel installations. Units should be spaced apart by at
least one panel height wherever possible, and some air movement is advisable in enclosed rack
cabinets. Excessive heat will shorten component life and modulator performance will be degraded
without proper cooling.
DSE 2 PLUS | 6
Instruction Manual