Draper Profile+ Instrucciones de montaje

Navegue en línea o descargue pdf Instrucciones de montaje para Pantalla de proyección Draper Profile+. Draper Profile+ 3 páginas. Permanently tensioned projection screen

Imprimir página

Profile +

Permanently Tensioned Projection Screen

Assembly & Mounting Instructions

Read instructions through completely before proceeding.

(1)

Follow instructions carefully.

(2)

Installation contrary to instructions invalidates warranty.

(3)

Screen should be accessible for complete removal should fabric

become damaged or should other service be required.

(4)

Screen should be installed level (using a carpenter's level).

(5)

Nothing should be fastened to screen frame or viewing surface.

(6)

Make sure you have received all parts (see parts list below and

exploded diagram on page 3).

Installer is responsible for providing appropriate hardware for mounting.

(7)

Draper recommends using two people for assembly and installation.

(8)

When lifting assembled screen, do not lift at only one corner; lift at both

corners. Lifting by one corner could result in damage to the screen

frame, especially on large screens.

The ideal temperature range for assembling permanently tensioned

(9)

screens to prevent damaging the surface is 68°-78° F (20°-26° C).

Assembling below recommended temperatures may damage surface

and void warranty.

Front

View

Back

View

Form Profile+_IInst16

Caution

Printed in U.S.A.

Tools Required:

Tape Measure

Pencil

Screwdriver

Profile Components:

Mounting

Brackets

"- Grade 8

Hex Screws

(several)

Vertical Support

Hex Head

Power Drill

Fastening

Sliding

Sliding Snap

Hook & Loop

Attachments

Attachment

(several)

Trim Frame

Corner

Trim Frame

Section

Frame Extrusion

Section

For Larger Sizes

Vertical Support

Connector

Hardware

(By others)