投影スクリーン Draper Profile+のPDF 組み立て/取り付け説明書をオンラインで閲覧またはダウンロードできます。Draper Profile+ 3 ページ。 Permanently tensioned projection screen
ページを印刷するProfile +
Permanently Tensioned Projection Screen
Assembly & Mounting Instructions
Read instructions through completely before proceeding.
(1)
Follow instructions carefully.
(2)
Installation contrary to instructions invalidates warranty.
(3)
Screen should be accessible for complete removal should fabric
become damaged or should other service be required.
(4)
Screen should be installed level (using a carpenter's level).
(5)
Nothing should be fastened to screen frame or viewing surface.
(6)
Make sure you have received all parts (see parts list below and
exploded diagram on page 3).
Installer is responsible for providing appropriate hardware for mounting.
(7)
Draper recommends using two people for assembly and installation.
(8)
When lifting assembled screen, do not lift at only one corner; lift at both
corners. Lifting by one corner could result in damage to the screen
frame, especially on large screens.
The ideal temperature range for assembling permanently tensioned
(9)
screens to prevent damaging the surface is 68°-78° F (20°-26° C).
Assembling below recommended temperatures may damage surface
and void warranty.
Front
View
Back
View
Copyright © 2016 Draper Inc.
Form Profile+_IInst16
Caution
Printed in U.S.A.
Tools Required:
Tape Measure
Pencil
Screwdriver
Profile Components:
Mounting
Brackets
/
"- Grade 8
5
32
Hex Screws
(several)
Vertical Support
Hex Head
Power Drill
Fastening
Sliding
Sliding Snap
Hook & Loop
Attachments
Attachment
(several)
(several)
Trim Frame
Corner
Corner
Trim Frame
Section
Frame Extrusion
Section
For Larger Sizes
Vertical Support
Connector
Hardware
(By others)