Draper 07849 Manual del usuario - Página 13

Navegue en línea o descargue pdf Manual del usuario para Herramienta eléctrica Draper 07849. Draper 07849 20 páginas. 10.8v rotary multi-tool kit

Imprimir página

PREPARING THE ROTARY MULTI-TOOL

8.1

BATTERY PACK CHARGING –

FIGS. 1 – 2

Important: Only Draper designated battery packs

and chargers can be used in conjunction with this

product. Use of any other third party battery packs/

chargers with this product is considered misuse

and will invalidate the product's warranty.

Once connected to the mains supply, recharging of

the battery can be left generally unsupervised,

requiring minimal attention. Complex circuit

construction monitors the battery condition,

adjusting the recharge current to suit. When the

recharge cycle is complete, to maintain the full

capacity, a low output current will continue as

required.

Warning! Check the condition of the charger and

battery prior to each charge. If there is any sign of

damage then do not commence charging, seek

advice from Draper Tools.

The battery pack is supplied un-charged and must

be charged before initial use.

To charge the battery pack (4), it must first be

removed from the tool.

Check the mains voltage. Make sure the voltage of

the power source is the same as the voltage

specified on the rating plate of the charger unit.

− Plug the charger adaptor mains plug into the

power source.

– Insert the battery pack (4) into the battery

charger (7).

– A full battery charge cycle will take approx. 1

hour.

– Remove the battery pack from the charger and

unplug.

8.2

BATTERY PACK CHARGE

STATUS – FIG.3

The amount of charge remaining in the battery

pack is indicated by the display (3) located on the

upper handle section.

– The display is made up of three lights; green,

orange and red, that illuminate every time the

ON/OFF switch is operated.

– The level of charge remaining determines how

many of the lights will illuminate; Red being

minimal low power, red/orange being half

power. All three lights illuminated, indicate full

charge.

FIG.

(3)

FIG.

– 13 –

(4)

(7)