Draper FlexShade Instrucciones de instalación y funcionamiento - Página 7

Navegue en línea o descargue pdf Instrucciones de instalación y funcionamiento para Mobiliario interior Draper FlexShade. Draper FlexShade 16 páginas. Exterior clutch-operated shade
También para Draper FlexShade: Manual de instalación y funcionamiento (8 páginas), Instrucciones de instalación (2 páginas), Manual de instrucciones (12 páginas), Instrucciones de instalación y funcionamiento (11 páginas), Instrucciones de instalación y funcionamiento (12 páginas), Instrucciones de instalación y funcionamiento (16 páginas), Instrucciones de instalación y funcionamiento (4 páginas), Manual de instrucciones (7 páginas), Instrucciones de instalación y funcionamiento (12 páginas)

Imprimir página
Draper FlexShade Instrucciones de instalación y funcionamiento
FlexShade
®
Section 6 - Installing Side Channels: Wall or Face Mounted Shade
NOTE: Side Channels must be installed parallel, plumb, and square, with a tolerance of +/- 1/ 8 "
1.
A.
Use a 3mm Hex Wrench to remove screws
from Side Channels.
B.
Remove Side Channel Covers.
WARNING: Do NOT remove the Bottom
Caps from Side Channels.
TIP: Use a pencil to scribe "L"
and "R"
(right)
PENCIL
A
A
4.
While bringing
Side Channel
into position,
insert shade
fabric Zipper on
one side of Hem
Bar into fabric
retainer in Side
Channels.
Crank-Operated ZIP
(left)
on inside of covers.
B
B
2.
Mark and drill Side Channels
at desired mounting points.
3.
Please Note: Guides are labeled
"L"
(Left)
5.
Move Side
Channel
into final position
while engaging
Side Channel
Guide with
locator tab on
the back side of
Endcap, behind
Roller.
.
(3mm)
Please Note:
REQUIRED attachment
of Side Channel to
structure: MINIMUM of
every 24"
Wall Mounting
Insert Side Channel Guide into
Side Channels.
Please Note: Ensure foam
cushions are not pinched,
folded or deformed.
and "R"
.
(right)
Angled leg of
must be oriented towards back
Side Channel Cross Section
6.
Attach Side Channels
to wall/structure. Use
appropriate fasteners
spaced MINIMUM of
every 24".
7.
Proceed to Section
10 - Reinstalling
Side Channel Covers
(Page 12)
page 7 of 16
.
(61cm)
FABRIC RETAINER STRIP
FOAM
CUSHION
FOAM
CUSHION
.