Draper FlexShade 설치 및 운영 지침 - 페이지 7

{카테고리_이름} Draper FlexShade에 대한 설치 및 운영 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Draper FlexShade 16 페이지. Exterior clutch-operated shade
Draper FlexShade에 대해서도 마찬가지입니다: 설치 및 운영 매뉴얼 (8 페이지), 설치 지침 (2 페이지), 사용 설명서 (12 페이지), 설치 및 작동 지침 (11 페이지), 설치 및 운영 지침 (12 페이지), 설치 및 운영 지침 (16 페이지), 설치 및 운영 지침 (4 페이지), 사용 설명서 (7 페이지), 설치 및 운영 지침 (12 페이지)

페이지 인쇄
Draper FlexShade 설치 및 운영 지침
FlexShade
®
Section 6 - Installing Side Channels: Wall or Face Mounted Shade
NOTE: Side Channels must be installed parallel, plumb, and square, with a tolerance of +/- 1/ 8 "
1.
A.
Use a 3mm Hex Wrench to remove screws
from Side Channels.
B.
Remove Side Channel Covers.
WARNING: Do NOT remove the Bottom
Caps from Side Channels.
TIP: Use a pencil to scribe "L"
and "R"
(right)
PENCIL
A
A
4.
While bringing
Side Channel
into position,
insert shade
fabric Zipper on
one side of Hem
Bar into fabric
retainer in Side
Channels.
Crank-Operated ZIP
(left)
on inside of covers.
B
B
2.
Mark and drill Side Channels
at desired mounting points.
3.
Please Note: Guides are labeled
"L"
(Left)
5.
Move Side
Channel
into final position
while engaging
Side Channel
Guide with
locator tab on
the back side of
Endcap, behind
Roller.
.
(3mm)
Please Note:
REQUIRED attachment
of Side Channel to
structure: MINIMUM of
every 24"
Wall Mounting
Insert Side Channel Guide into
Side Channels.
Please Note: Ensure foam
cushions are not pinched,
folded or deformed.
and "R"
.
(right)
Angled leg of
must be oriented towards back
Side Channel Cross Section
6.
Attach Side Channels
to wall/structure. Use
appropriate fasteners
spaced MINIMUM of
every 24".
7.
Proceed to Section
10 - Reinstalling
Side Channel Covers
(Page 12)
page 7 of 16
.
(61cm)
FABRIC RETAINER STRIP
FOAM
CUSHION
FOAM
CUSHION
.