Draper FlexShade NEXD Manual de instrucciones - Página 4

Navegue en línea o descargue pdf Manual de instrucciones para Mobiliario interior Draper FlexShade NEXD. Draper FlexShade NEXD 12 páginas. Clutch-operated small and large hardware
También para Draper FlexShade NEXD: Instrucciones de instalación y funcionamiento (6 páginas), Instrucciones de instalación y funcionamiento (8 páginas), Manual de instrucciones (8 páginas), Instrucciones de instalación y funcionamiento (8 páginas), Instrucciones de instalación y funcionamiento (10 páginas)

Imprimir página
Draper FlexShade NEXD Manual de instrucciones
Dual Roller FlexShade

Section 2 - Pocket Headbox Installation

PLEASE NOTE: Installer must provide adequate clearance for
removal of Roller Assembly during installation and maintenance.
PLEASE NOTE: Headbox must be mounted directly to ceiling, or
to a continuous blocking that is secured to building structure.
Figure 3-B
1.
2.
Mark location of optional
pre-drilled pocket
mounting holes and
endcap mounting holes
on top side of headbox
on mounting surface.
Figure 3-D
Endcaps mounted
to continuous
blocking (by others)
secured to
building
structure.
(SMALL HARDWARE SHOWN)
NEXD
®
Lift headbox into
mounting position.
Figure 3-A
Figure 3-C
3.
Drill small
starter hole
(if necessary)
in mounting
surface.
1.
Closure
Panel
Headbox
2.
Closure
Headbox
Panel
Ceiling
(by others)
page 4 of 12
4.
Mount pocket
headbox using
appropriate
fasteners for
surface.
5.
Mount endcaps using
appropriate fasteners
for surface
.
(Section 1)
6.
Mount pocket
closure.
.
(Fig. 3-D)