Draper FlexShade NEXD Manuel d'instructions - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel d'instructions pour {nom_de_la_catégorie} Draper FlexShade NEXD. Draper FlexShade NEXD 12 pages. Clutch-operated small and large hardware
Également pour Draper FlexShade NEXD : Instructions d'installation et d'utilisation (6 pages), Instructions Installation et fonctionnement (8 pages), Manuel d'instructions (8 pages), Instructions Installation et fonctionnement (8 pages), Instructions Installation et fonctionnement (10 pages)

Imprimer la page
Draper FlexShade NEXD Manuel d'instructions
Dual Roller FlexShade

Section 2 - Pocket Headbox Installation

PLEASE NOTE: Installer must provide adequate clearance for
removal of Roller Assembly during installation and maintenance.
PLEASE NOTE: Headbox must be mounted directly to ceiling, or
to a continuous blocking that is secured to building structure.
Figure 3-B
1.
2.
Mark location of optional
pre-drilled pocket
mounting holes and
endcap mounting holes
on top side of headbox
on mounting surface.
Figure 3-D
Endcaps mounted
to continuous
blocking (by others)
secured to
building
structure.
(SMALL HARDWARE SHOWN)
NEXD
®
Lift headbox into
mounting position.
Figure 3-A
Figure 3-C
3.
Drill small
starter hole
(if necessary)
in mounting
surface.
1.
Closure
Panel
Headbox
2.
Closure
Headbox
Panel
Ceiling
(by others)
page 4 of 12
4.
Mount pocket
headbox using
appropriate
fasteners for
surface.
5.
Mount endcaps using
appropriate fasteners
for surface
.
(Section 1)
6.
Mount pocket
closure.
.
(Fig. 3-D)