Alemlube 660AN Manual técnico del propietario
Navegue en línea o descargue pdf Manual técnico del propietario para Herramientas Alemlube 660AN. Alemlube 660AN 2 páginas. Trigger action grease gun
También para Alemlube 660AN: Manual técnico del propietario (2 páginas)
Imprimir página
Description
Model 660AN is a trigger action 450gm grease gun capable of delivering up to 1.1cc of grease per stroke at a maximum
operating pressure of up to 8,500psi. It comes standard with a 30cm flexible extension & a 4 jaw coupler for those
difficult to get at lubrication points. The 660AN has a 600gm capacity when using bulk grease & features a slip-type
pressure/volume adjustment which changes the gun from high pressure to high volume.
Specifications
Uses
Grease Pressure
Delivery
Capacity
Operating instructions
There are two ways to fill the gun with grease:
A) 450gm Grease Cartridge:
Unscrew the grease barrel from the gun and insert the 450gm grease
cartridge by holding the barrel assembly & pulling therod back. Remove
cap from the grease cartridge, insert the cartridge into the barrel & then
rescrew the barrel assembly back onto the gun so that the cartridge sits
well against the follower cup. Once in position, press the clamp down &
push the rod firmly back into the barrel.
Important To Note:
When using the gun with a cartridge, the follower cup must be folded
back. The gun is supplied standard with the follower cup in this position.
B) Bulk Grease Loading:
Unscrew the grease barrel from the gun head & insert the barrel into
the bulk grease. Suck the grease up into the barrel by pulling the rod all
the way back. When barrel is full with grease, rescrew the barrel
assembly back onto the gun head so that the follower sits well against
the grease. Press the clamp down & push the rod firmly back into the
barrel.
Important To Note:
When using the gun with bulk grease, the follower cup must be folded
forward. To do this, take the follower cup and rod assembly out of the
barrel, fold the follower cup forward and reassemble the barrel
assembly.
Maintenance
Cleaning: always keep the follower cup free of impurities. Your grease
should be clear of any foreign particles, dirt etc and the gun should be
checked and cleaned regularly.
Trouble Shooting
Air pockets in grease:
If the gun is pumped but no grease appears from the coupler: Depress the air bleeder valve on the head and pump a
few strokes. Unscrew the barrel assembly from the gun head with two or three turns and then push on the plunger rod.
With the follower cup engaged, the follower cup will move further down into the barrel venting any trapped air out
through the thread connections between the barrel and head. Unscrew the flex extension as well.
NSW
QLD/PNG
TEL: (02) 9939 0711
TEL: (07) 3889 8480
FAX: (02) 9939 0411
FAX: (07) 3889 8490
Visit our website at
OWNER'S TECHNICAL MANUAL
660AN Trigger Action Grease Gun
450gm Grease Cartridges, Suction loading, Bulk loader pump from bulk grease drum
Maximum operating pressure of up to 8,500psi
0.64cc per stroke (high pressure setting) / 1.1cc per stroke (high volume setting)
600gm capacity when using bulk grease
VIC/TAS
TEL: (03) 8787 8288
FAX: (03) 8787 8266
www.alemlube.com.au
WA
SA/NT
TEL: (08) 9209 3066
TEL: (08) 8241 7111
FAX: (08) 9209 3933
FAX: (08) 8241 7011
Email - [email protected]
660AN
NZ
TEL: (09) 447 1007
FAX: (09) 447 1008