Alemlube 660AN Sahip Teknik Kılavuzu

Araçlar Alemlube 660AN için çevrimiçi göz atın veya pdf Sahip Teknik Kılavuzu indirin. Alemlube 660AN 2 sayfaları. Trigger action grease gun
Ayrıca Alemlube 660AN için: Sahip Teknik Kılavuzu (2 sayfalar)

Sayfayı Yazdır

Description

Model 660AN is a trigger action 450gm grease gun capable of delivering up to 1.1cc of grease per stroke at a maximum

operating pressure of up to 8,500psi. It comes standard with a 30cm flexible extension & a 4 jaw coupler for those

difficult to get at lubrication points. The 660AN has a 600gm capacity when using bulk grease & features a slip-type

pressure/volume adjustment which changes the gun from high pressure to high volume.

Specifications

Uses

Grease Pressure

Delivery

Capacity

Operating instructions

There are two ways to fill the gun with grease:

A) 450gm Grease Cartridge:

Unscrew the grease barrel from the gun and insert the 450gm grease

cartridge by holding the barrel assembly & pulling therod back. Remove

cap from the grease cartridge, insert the cartridge into the barrel & then

rescrew the barrel assembly back onto the gun so that the cartridge sits

well against the follower cup. Once in position, press the clamp down &

push the rod firmly back into the barrel.

Important To Note:

When using the gun with a cartridge, the follower cup must be folded

back. The gun is supplied standard with the follower cup in this position.

B) Bulk Grease Loading:

Unscrew the grease barrel from the gun head & insert the barrel into

the bulk grease. Suck the grease up into the barrel by pulling the rod all

the way back. When barrel is full with grease, rescrew the barrel

assembly back onto the gun head so that the follower sits well against

the grease. Press the clamp down & push the rod firmly back into the

barrel.

Important To Note:

When using the gun with bulk grease, the follower cup must be folded

forward. To do this, take the follower cup and rod assembly out of the

barrel, fold the follower cup forward and reassemble the barrel

assembly.

Maintenance

Cleaning: always keep the follower cup free of impurities. Your grease

should be clear of any foreign particles, dirt etc and the gun should be

checked and cleaned regularly.

Trouble Shooting

Air pockets in grease:

If the gun is pumped but no grease appears from the coupler: Depress the air bleeder valve on the head and pump a

few strokes. Unscrew the barrel assembly from the gun head with two or three turns and then push on the plunger rod.

With the follower cup engaged, the follower cup will move further down into the barrel venting any trapped air out

through the thread connections between the barrel and head. Unscrew the flex extension as well.

NSW

QLD/PNG

TEL: (02) 9939 0711

TEL: (07) 3889 8480

FAX: (02) 9939 0411

FAX: (07) 3889 8490

Visit our website at

OWNER'S TECHNICAL MANUAL

660AN Trigger Action Grease Gun

450gm Grease Cartridges, Suction loading, Bulk loader pump from bulk grease drum

Maximum operating pressure of up to 8,500psi

0.64cc per stroke (high pressure setting) / 1.1cc per stroke (high volume setting)

600gm capacity when using bulk grease

VIC/TAS

TEL: (03) 8787 8288

FAX: (03) 8787 8266

www.alemlube.com.au

SA/NT

TEL: (08) 9209 3066

TEL: (08) 8241 7111

FAX: (08) 9209 3933

FAX: (08) 8241 7011

Email - [email protected]

660AN

TEL: (09) 447 1007

FAX: (09) 447 1008