Alemlube 670AN3 Manual técnico del propietario - Página 5
Navegue en línea o descargue pdf Manual técnico del propietario para Herramientas Alemlube 670AN3. Alemlube 670AN3 8 páginas. 18v cordless grease gun 450g
Imprimir página
Cordless Grease Gun
General Safety Rules (Continued)
Read all instructions: Failure to follow all instructions listed below may result in electric shock,
fire and/or serious injury. Save these instructions.
Power Tool Use and Care
• Do not force the power tool. Use the correct power tool for your application. The correct power tool
will do the job better and safer at the rate for which it was designed.
• Do not use the power tool if the switch does not turn it on and off. Any power tool that can not be
controlled with the switch is dangerous and must be repaired.
• Disconnect the plug from the power source before making any adjustments, changing accessories, or
storing power tools. Such preventive safety measures reduce the risk of starting the power tool
accidentally.
• Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power
tool or these instructions to operate the power tool. Power tools are dangerous in the hands of
untrained users.
• Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any
other condition that may affect the power tools operation. If damaged, have the power tool repaired
before use. Many accidents are caused by poorly maintained power tools.
• Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control.
• Use the power tool, accessories and tool bits etc., in accordance with these instructions and in the
manner intended for the particular type of power tool, taking into account the working conditions and
the work to be performed. Use of the power tool for operations different from intended could result in a
hazardous situation.
Battery Use and Care
• Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type
of battery pack may create a risk of fire when used with another battery pack.
• Use power tools only with specifically designated battery packs. Use of any other battery packs may
create a risk of injury and fire.
• When battery pack is not in use, keep it away from other metal objects like paper clips, coins,
keys, nails, screws, or other small metal objects that can make a connection from one terminal to
another. Shorting the battery terminals together may cause burns or a fire.
• Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact
accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid
ejected from the battery may cause irritation or burns.
• Disconnect battery pack from gun before changing accessories, storing gun or unscrewing
grease cylinder from the gun.
• Ensure the switch is in the off position before inserting battery pack. Inserting the battery pack into
power tools that have the switch on invites accidents.
• Never attempt to open the battery pack for any reason.
• Do not expose the battery pack to water.
• Do not store the battery pack in locations where the temperature may exceed 104° F (40° C).
• Charge the battery pack only at ambient temperatures between 40° F (4° C) or above 104° F (40° C).
Service
• Have your power tool serviced by a qualified repair person using only identical replacement parts. This
will ensure that the safety of the power tool is maintained.
NSW
TEL: (02) 9677 1555
Alemite, LLC
FAX: (02) 9675 1155
QLD/PNG
VIC/TAS
TEL: (07) 3204 9166
TEL: (03) 8787 8288
FAX: (07) 3204 1224
FAX: (03) 8787 8266
Visit our website at
www.alemlube.com.au
WARNING
WA
TEL: (08) 9302 4199
5
FAX: (08) 9303 2095
or
www.alemlube.co.nz
SER 595-A
SA/NT
NZ
TEL: (08) 8241 7111
TEL: (09) 447 1007
Revision (10-11)
FAX: (08) 8241 7011
FAX: (09) 447 1008