Alemlube 670AN3 Panduan Teknis Pemilik - Halaman 5

Jelajahi secara online atau unduh pdf Panduan Teknis Pemilik untuk Peralatan Alemlube 670AN3. Alemlube 670AN3 8 halaman. 18v cordless grease gun 450g

Halaman Cetak

Cordless Grease Gun

General Safety Rules (Continued)

Read all instructions: Failure to follow all instructions listed below may result in electric shock,

fire and/or serious injury. Save these instructions.

Power Tool Use and Care

• Do not force the power tool. Use the correct power tool for your application. The correct power tool

will do the job better and safer at the rate for which it was designed.

• Do not use the power tool if the switch does not turn it on and off. Any power tool that can not be

controlled with the switch is dangerous and must be repaired.

• Disconnect the plug from the power source before making any adjustments, changing accessories, or

storing power tools. Such preventive safety measures reduce the risk of starting the power tool

accidentally.

• Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power

tool or these instructions to operate the power tool. Power tools are dangerous in the hands of

untrained users.

• Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any

other condition that may affect the power tools operation. If damaged, have the power tool repaired

before use. Many accidents are caused by poorly maintained power tools.

• Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are

less likely to bind and are easier to control.

• Use the power tool, accessories and tool bits etc., in accordance with these instructions and in the

manner intended for the particular type of power tool, taking into account the working conditions and

the work to be performed. Use of the power tool for operations different from intended could result in a

hazardous situation.

Battery Use and Care

• Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type

of battery pack may create a risk of fire when used with another battery pack.

• Use power tools only with specifically designated battery packs. Use of any other battery packs may

create a risk of injury and fire.

• When battery pack is not in use, keep it away from other metal objects like paper clips, coins,

keys, nails, screws, or other small metal objects that can make a connection from one terminal to

another. Shorting the battery terminals together may cause burns or a fire.

• Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact

accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid

ejected from the battery may cause irritation or burns.

• Disconnect battery pack from gun before changing accessories, storing gun or unscrewing

grease cylinder from the gun.

• Ensure the switch is in the off position before inserting battery pack. Inserting the battery pack into

power tools that have the switch on invites accidents.

• Never attempt to open the battery pack for any reason.

• Do not expose the battery pack to water.

• Do not store the battery pack in locations where the temperature may exceed 104° F (40° C).

• Charge the battery pack only at ambient temperatures between 40° F (4° C) or above 104° F (40° C).

Service

• Have your power tool serviced by a qualified repair person using only identical replacement parts. This

will ensure that the safety of the power tool is maintained.

NSW

TEL: (02) 9677 1555

Alemite, LLC

FAX: (02) 9675 1155

QLD/PNG

VIC/TAS

TEL: (07) 3204 9166

TEL: (03) 8787 8288

FAX: (07) 3204 1224

FAX: (03) 8787 8266

Visit our website at

www.alemlube.com.au

WARNING

TEL: (08) 9302 4199

FAX: (08) 9303 2095

www.alemlube.co.nz

SER 595-A

SA/NT

TEL: (08) 8241 7111

TEL: (09) 447 1007

Revision (10-11)

FAX: (08) 8241 7011

FAX: (09) 447 1008