Electrolux 500 TimeCare EW6T3226B3 Manual del usuario - Página 25
Navegue en línea o descargue pdf Manual del usuario para Lavadora Electrolux 500 TimeCare EW6T3226B3. Electrolux 500 TimeCare EW6T3226B3 32 páginas.
Imprimir páginaWARNING!
Make sure that the
temperature is more than
0°C before you use the
appliance again. The
manufacturer is not
responsible for damages
caused by low temperatures.
14. TROUBLESHOOTING
WARNING!
Refer to Safety chapters.
14.1 Alarm Codes and Possible failures
The appliance does not start or it stops during operation. First try to
find a solution to the problem (refer to the tables).
WARNING!
Deactivate the appliance before carrying out any
check.
With some problems, the acoustic signals operate. The red indicator
flashes and one of the indicators comes on, to show an alarm
code:
Problem
The appliance does
not fill with water
properly.
The appliance does
not drain the water.
Possible solution
• Make sure that the water tap is open.
• Make sure that the pressure of the water supply is not too
low. For this information, contact your local water authority.
• Make sure that the water tap is not clogged.
• Make sure that the inlet hose has no kinks, damages or
bends.
• Make sure that the connection of the water inlet hose is
correct.
• Make sure that the filter of the inlet hose and the filter of
the valve are not clogged. Refer to 'Care and cleaning'.
• Make sure that the sink spigot is not clogged.
• Make sure that the drain hose has no kinks or bends.
• Make sure that the drain filter is not clogged. Clean the fil‐
ter, if necessary. Refer to "Care and cleaning".
• Make sure that the connection of the drain hose is correct.
• Set the drain programme if you set a programme without
drain phase.
• Set the drain programme if you set an option which ends
with water in the tub.
ENGLISH
25