Electrolux 500 TimeCare EW6T3226B3 Manuale d'uso - Pagina 25

Sfoglia online o scarica il pdf Manuale d'uso per Lavatrice Electrolux 500 TimeCare EW6T3226B3. Electrolux 500 TimeCare EW6T3226B3 32.

Stampa la pagina

WARNING!

Make sure that the

temperature is more than

0°C before you use the

appliance again. The

manufacturer is not

responsible for damages

caused by low temperatures.

14. TROUBLESHOOTING

WARNING!

Refer to Safety chapters.

14.1 Alarm Codes and Possible failures

The appliance does not start or it stops during operation. First try to

find a solution to the problem (refer to the tables).

WARNING!

Deactivate the appliance before carrying out any

check.

With some problems, the acoustic signals operate. The red indicator

flashes and one of the indicators comes on, to show an alarm

code:

Problem

The appliance does

not fill with water

properly.

The appliance does

not drain the water.

Possible solution

• Make sure that the water tap is open.

• Make sure that the pressure of the water supply is not too

low. For this information, contact your local water authority.

• Make sure that the water tap is not clogged.

• Make sure that the inlet hose has no kinks, damages or

bends.

• Make sure that the connection of the water inlet hose is

correct.

• Make sure that the filter of the inlet hose and the filter of

the valve are not clogged. Refer to 'Care and cleaning'.

• Make sure that the sink spigot is not clogged.

• Make sure that the drain hose has no kinks or bends.

• Make sure that the drain filter is not clogged. Clean the fil‐

ter, if necessary. Refer to "Care and cleaning".

• Make sure that the connection of the drain hose is correct.

• Set the drain programme if you set a programme without

drain phase.

• Set the drain programme if you set an option which ends

with water in the tub.

ENGLISH