Electrolux C260R Manual de instrucciones - Página 14
Navegue en línea o descargue pdf Manual de instrucciones para Lavadora Electrolux C260R. Electrolux C260R 24 páginas. Hydro-extractor
También para Electrolux C260R: Manual de servicio (41 páginas), Manual de funcionamiento e instalación (20 páginas)
Imprimir página
14
Error code E14
When the ignition control fails to detect a flame, a signal is sent to the PCB, and error code
E14 is displayed.
When this condition occurs, the gas valve is shut off and the ignition control must be reset
manually.
Resetting
Open the operating panel and press the gas reset button A on the back of the
1
PCB for one second.
OPL: Press the reset button B next to the operating panel.
2
NOTE! When resetting the system the dryer must operate on a program with heat
and the heat indicator must be on.
Japan only: By opening and closing the door (coin operated dryers only).
Error code
It is normal that error code E14 occurs when first starting up the dryer, since air in the gas
line must be purged.
Check that air supply to the room and ventilation are compliant with the recommendations
given in the installation manual.
If the problem persists, refer to Error code 14 in the Selecta Control service manual for
more information.
1
2
Error codes
A
B