Electrolux C260R Посібник з експлуатації - Сторінка 14

Переглянути онлайн або завантажити pdf Посібник з експлуатації для Пральна машина Electrolux C260R. Electrolux C260R 24 сторінки. Hydro-extractor
Також для Electrolux C260R: Посібник з експлуатації (41 сторінок), Посібник з експлуатації та встановлення (20 сторінок)

Error code E14

When the ignition control fails to detect a flame, a signal is sent to the PCB, and error code

E14 is displayed.

When this condition occurs, the gas valve is shut off and the ignition control must be reset

manually.

Resetting

Open the operating panel and press the gas reset button A on the back of the

PCB for one second.

OPL: Press the reset button B next to the operating panel.

NOTE! When resetting the system the dryer must operate on a program with heat

and the heat indicator must be on.

Japan only: By opening and closing the door (coin operated dryers only).

Error code

It is normal that error code E14 occurs when first starting up the dryer, since air in the gas

line must be purged.

Check that air supply to the room and ventilation are compliant with the recommendations

given in the installation manual.

If the problem persists, refer to Error code 14 in the Selecta Control service manual for

more information.

Error codes