Carl's Place Pro Enclosure Kit Instrucciones de montaje y manual de usuario - Página 4

Navegue en línea o descargue pdf Instrucciones de montaje y manual de usuario para Recinto Carl's Place Pro Enclosure Kit. Carl's Place Pro Enclosure Kit 20 páginas.
También para Carl's Place Pro Enclosure Kit: Instrucciones de montaje y manual de usuario (17 páginas), Instrucciones de montaje y manual de usuario (20 páginas)

Assemble Frame

Using the Frame Assembly Sheet included in this manual, construct your

frame.

If you bought a pipe kit from Carl's Place, simply insert the pipes fully into

the connectors and tighten with 6mm Hex. If you did not buy a pipe kit

from Carl's Place, you must source your own pipes, cut to the specifications

shown on the Frame Assembly Sheet.

If you bought a back cover for your enclosure, you'll receive further instruc-

tions on incorporating that into your frame assembly. If you did not, you will

not use the small nubs to the rear of the enclosure.

Start by putting together the bottom base of the frame. If necessary, use

a rubber mallet to completely insert the pipes into the fittings. Then, work

bottom to top, back to front.

Page | 4