Carl's Place Pro Enclosure Kit Montagehandleiding - Pagina 4
Blader online of download pdf Montagehandleiding voor {categorie_naam} Carl's Place Pro Enclosure Kit. Carl's Place Pro Enclosure Kit 20 pagina's.
Ook voor Carl's Place Pro Enclosure Kit: Montagehandleiding (17 pagina's), Montagehandleiding (20 pagina's)
Pagina afdrukkenAssemble Frame
Using the Frame Assembly Sheet included in this manual, construct your
frame.
If you bought a pipe kit from Carl's Place, simply insert the pipes fully into
the connectors and tighten with 6mm Hex. If you did not buy a pipe kit
from Carl's Place, you must source your own pipes, cut to the specifications
shown on the Frame Assembly Sheet.
If you bought a back cover for your enclosure, you'll receive further instruc-
tions on incorporating that into your frame assembly. If you did not, you will
not use the small nubs to the rear of the enclosure.
Start by putting together the bottom base of the frame. If necessary, use
a rubber mallet to completely insert the pipes into the fittings. Then, work
bottom to top, back to front.
Page | 4