Anchor AF-4003 Manual de instrucciones de instalación - Página 10
Navegue en línea o descargue pdf Manual de instrucciones de instalación para Sistemas de filtración de agua Anchor AF-4003. Anchor AF-4003 10 páginas. Under counter water filter system
También para Anchor AF-4003: Manual de configuración rápida (9 páginas), Manual de configuración rápida (9 páginas)
Imprimir página
TROUBLESHOOTING
LEAKS
1.
Filter sump: The O-ring in the sump may not be making firm contact, have dirt or hair on it or be
stretched. Clean or replace O-ring and tighten sump to make firm contact with cap.
2.
Fitting Connection: Compression - Check that the fitting is tightened with all parts in proper place
(refer to Fig. #8).
NO WATER OR SLOW FLOW
1. Check colored tubing for correct connections
2.
Check the saddle valve at the water supply adapter is turned all the way counterclockwise for
feed water and that there is no restrictions along the white tubing.
3.
Check the pre-filter, if it has a heavy dirt load it can restrict water flow to the system. Change
sediment pre-filter regularly.
CUSTOMER SATISFACTION IS OF PRIMARY CONCERN, PLEASE CALL IN THE
Warning: Do not use this system if feed water has biological contamination or of unknown source.
For operating parameters, please contact our technical support department.
EVENT THERE IS A SERVICE PROBLEM.
10 |
P a g e