Anchor AF-4003 Instrukcja instalacji - Strona 10

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Systemy filtracji wody Anchor AF-4003. Anchor AF-4003 10 stron. Under counter water filter system
Również dla Anchor AF-4003: Podręcznik szybkiej konfiguracji (9 strony), Podręcznik szybkiej konfiguracji (9 strony)

Drukuj stronę
Anchor AF-4003 Instrukcja instalacji

TROUBLESHOOTING

LEAKS
1.
Filter sump: The O-ring in the sump may not be making firm contact, have dirt or hair on it or be
stretched. Clean or replace O-ring and tighten sump to make firm contact with cap.
2.
Fitting Connection: Compression - Check that the fitting is tightened with all parts in proper place
(refer to Fig. #8).
NO WATER OR SLOW FLOW
1. Check colored tubing for correct connections
2.
Check the saddle valve at the water supply adapter is turned all the way counterclockwise for
feed water and that there is no restrictions along the white tubing.
3.
Check the pre-filter, if it has a heavy dirt load it can restrict water flow to the system. Change
sediment pre-filter regularly.
CUSTOMER SATISFACTION IS OF PRIMARY CONCERN, PLEASE CALL IN THE
Warning: Do not use this system if feed water has biological contamination or of unknown source.
For operating parameters, please contact our technical support department.
EVENT THERE IS A SERVICE PROBLEM.
10 |
P a g e