Anchor WH-EXT500 Manual del usuario - Página 11

Navegue en línea o descargue pdf Manual del usuario para Sistema de micrófono Anchor WH-EXT500. Anchor WH-EXT500 19 páginas.

SYSTEM OPERATION

Prior to setting up, please check that the transmitter and receiver are tuned to the same frequency or channel. Two or more transmitters

operating in the same frequency can not be used at the same time and same area.

Balanced XLR Cable

Unbalanced 1/4" Phono Cable

Maximum SQ

Minimum SQ

Connect the provided DC power supply to the receiver with an appropriate AC

power source. The receiver is on when the LCD screen display lights up.

Using a standard audio cable with 3-pin XLR connectors or 1/4" phono cable to

connect the mixer or amplifier

Never use the balanced and unbalanced audio outputs at the same time. This may

cause signal loss or increased noise

Set the audio output level for

MIC: -20dB

LINE: 0dB (Default setting)

Using the Volume Knob to adjust the AF audio level to the input of the

amplifier or mixer.

Default settings: In minimum VOLUME position.

VOLUME

Use the SQ (squelch) to avoid reproducing noise when the receiver does not receive

enough signal from the transmitter.

Turn clockwise to increase squelch and reduce noise. When turning the squelch

knob clockwise, it begins to eliminate background noise.

When squelch is all the way to the left, the squelch is off and the ambient RF noise

will be easily heard.

Default settings: In minimum SQ position.