Anchor WH-EXT500 소유자 매뉴얼 - 페이지 11

{카테고리_이름} Anchor WH-EXT500에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Anchor WH-EXT500 19 페이지.

SYSTEM OPERATION
Prior to setting up, please check that the transmitter and receiver are tuned to the same frequency or channel. Two or more transmitters
operating in the same frequency can not be used at the same time and same area.
Balanced XLR Cable
Unbalanced 1/4" Phono Cable
Maximum SQ
Minimum SQ
Connect the provided DC power supply to the receiver with an appropriate AC
power source. The receiver is on when the LCD screen display lights up.
Using a standard audio cable with 3-pin XLR connectors or 1/4" phono cable to
connect the mixer or amplifier
Never use the balanced and unbalanced audio outputs at the same time. This may
cause signal loss or increased noise
Set the audio output level for
MIC: -20dB
LINE: 0dB (Default setting)
Using the Volume Knob to adjust the AF audio level to the input of the
amplifier or mixer.
Default settings: In minimum VOLUME position.
VOLUME
Use the SQ (squelch) to avoid reproducing noise when the receiver does not receive
enough signal from the transmitter.
Turn clockwise to increase squelch and reduce noise. When turning the squelch
knob clockwise, it begins to eliminate background noise.
When squelch is all the way to the left, the squelch is off and the ambient RF noise
will be easily heard.
Default settings: In minimum SQ position.
10