AND UA-1010 Manual de instrucciones - Página 13

Navegue en línea o descargue pdf Manual de instrucciones para Tensiómetro AND UA-1010. AND UA-1010 20 páginas.
También para AND UA-1010: Manual de instrucciones (20 páginas)

Imprimir página

Measurement with the Desired Systolic Pressure

Model UA-1010 is designed to detect the pulse and to inflate the cuff to a

systolic pressure level automatically.

Use this method when re-inflation occurs repeatedly or when the results are not

displayed even if the pressure decreases to 20 mmHg or less.

Place the cuff on the arm (preferably the left arm).

Press and hold the

number about 30 to 40 mmHg higher

than your expected systolic pressure

appears.

When the desired number is reached,

release the

measurement. Continue to measure

your blood pressure as described on

the previous page.

Notes for Proper Measurement

Sit down in a comfortable position. Place your arm on a table with your

palm facing upward and the cuff at the same level as your heart.

Relax for about five to ten minutes before taking a measurement. If you

are excited or depressed by emotional stress, the measurement will

reflect this stress as a higher (or lower) than normal blood pressure

reading and the pulse reading will usually be faster than normal.

An individual's blood pressure varies constantly, depending on what you

are doing and what you have eaten. What you drink can have a very

strong and rapid effect on your blood pressure.

This device bases its measurements on the heartbeat. If you have a very

weak or irregular heartbeat, the device may have difficulty determining

your blood pressure.

Should the device detect a condition that is abnormal, it will stop the

measurement and display an error symbol. Refer to page 5 for the

description of symbols.

This blood pressure monitor is intended for use by adults only. Consult

with your physician before using this device on a child. A child should not

use this device unattended.

Measurements

button until a

START

button to start

START

English 12

At heart level

Press and hold

the button

Release the button

at the desired

systolic pressure

Refer to the previous page

for measurement

START