AND UA-1010 Manual de instrucciones - Página 11

Navegue en línea o descargue pdf Manual de instrucciones para Tensiómetro AND UA-1010. AND UA-1010 20 páginas.
También para AND UA-1010: Manual de instrucciones (20 páginas)

Imprimir página

Applying the Arm Cuff

1. Wrap the cuff around the upper arm,

about 1-2 cm above the inside of the

elbow, as shown.

Place the cuff directly against the

skin, as clothing may cause a faint

pulse, and result in a measurement

error.

2. Constriction of the upper arm,

caused by tightly rolling up a

shirtsleeve, may prevent accurate

readings.

3. Confirm that the index

within the proper fit range.

How to Take Proper Measurements

For the most accurate blood pressure measurement:

Sit comfortably at a table. Rest your arm on the table.

Relax for about five to ten minutes before measurement.

Place the center of the cuff at the same height as your heart.

Remain still and keep quiet during measurement.

Do not measure right after physical exercise or a bath. Rest for twenty or

thirty minutes before taking the measurement.

Try to measure your blood pressure at the same time every day.

Measurement

During measurement, it is normal for the cuff to feel very tight. (Do not be

alarmed).

After Measurement

After measurement, press the START button to turn the device off. After one

minute of non-operation, the device will turn off automatically.

Remove the cuff and record your data.

Note: Allow at least three minutes between measurements on the same person.

Using the Monitor

points

English 10

Do not roll up shirtsleeve tightly.

Cuff

1-2 cm

Artery position mark

Secure the fabric

fastener firmly.

Index

and proper fit range

Air Hose