- ページ 11

血圧モニター AND UA-1010のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。AND UA-1010 20 ページ。
AND UA-1010 にも：取扱説明書 (20 ページ)

Applying the Arm Cuff

1. Wrap the cuff around the upper arm,

about 1-2 cm above the inside of the

elbow, as shown.

Place the cuff directly against the

skin, as clothing may cause a faint

pulse, and result in a measurement

error.

2. Constriction of the upper arm,

caused by tightly rolling up a

shirtsleeve, may prevent accurate

readings.

3. Confirm that the index

within the proper fit range.

For the most accurate blood pressure measurement:

Sit comfortably at a table. Rest your arm on the table.

Relax for about five to ten minutes before measurement.

Place the center of the cuff at the same height as your heart.

Remain still and keep quiet during measurement.

Do not measure right after physical exercise or a bath. Rest for twenty or

thirty minutes before taking the measurement.

Try to measure your blood pressure at the same time every day.

During measurement, it is normal for the cuff to feel very tight. (Do not be

alarmed).

After measurement, press the START button to turn the device off. After one

minute of non-operation, the device will turn off automatically.

Remove the cuff and record your data.

Note: Allow at least three minutes between measurements on the same person.

Using the Monitor

points

English 10

Do not roll up shirtsleeve tightly.

Cuff

1-2 cm

Artery position mark

Secure the fabric

fastener firmly.

Index

and proper fit range

Air Hose