- ページ 12

血圧モニター AND UA-1010のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。AND UA-1010 20 ページ。
AND UA-1010 にも：取扱説明書 (20 ページ)

ページを印刷する

Before measurement, read "Notes for Proper Measurement" on the next page.

Normal Measurement

Place the cuff on the arm (preferably the left arm).

Sit quietly during measurement.

Press the

START

All of the display segments are displayed.

Zero (0) is displayed blinking briefly.

The display changes, as indicated in the

figure at the right, as the measurement

begins. The cuff starts to inflate. It is normal

for the cuff to feel very tight. A pressure bar

indicator is displayed, on the left edge of the

display, during the inflation.

Note: If you wish to stop inflation at any time,

press the

When inflation is complete, deflation starts

automatically and

indicating that the measurement is in

progress. Once the pulse is detected, the

mark blinks with each pulse beat.

Note: If an appropriate pressure is not obtained, the

device starts to inflate again automatically.

To avoid re-inflation, see "Measurement

with the Desired Systolic Pressure" on

the next page.

When the measurement is complete, the

systolic and diastolic pressure readings

and pulse rate are displayed.

The cuff exhausts the remaining air and

deflates completely.

Press the

START

After one minute of non-operation,

the device will turn off automatically.

Note: Allow at least three minutes between

measurements on the same person.

Measurements

button.

button again.

START

(heart mark) blinks,

button to turn the device off.

English 11

At heart level

Press

All of the display

segments displayed

Zero display

Starts inflation

Pressurizing

Measurement

in progress

Systolic pressure

Diastolic pressure

WHO classification

Pulse rate

Exhausts remaining

air automatically

START