Carman AUTO-i 700 Manual rápido - Página 3

Navegue en línea o descargue pdf Manual rápido para Equipos de diagnóstico Carman AUTO-i 700. Carman AUTO-i 700 4 páginas.

How to use

1. Check a location of diagnostic connector on a car.

- If your car usesOBD-II, most diagnostic connector is

located between a handle and a brake pedal.

- If your car is old one, not supporting OBD-II, it requires a

additional connector. Check a proper connector among

what we supplies. Location of the connector may be

different according to car models.

3. Turn on AUTO-i 700.

- Press power button for a second to start boot with

booting sound.

(Use only our AC/DC power adapter. Use your scanner

after charging batter fully.

- Remove a protection film before using it.

How to download programs

AUTO-i 700 needs diagnostic program to operate. Also, it is required to update new software and firmware sometimes

for new vehicle model and new system.

- Please contact to where you purchased about downloading latest software for update.

- Please refer to how to download on our website.

Website: http://www.carmanit.com/eng

- In the future, you may download a software automatically via Wi-Fi without connection of cable and may print captured

screens wirelessly. (Printing wirelessly requires a PC connected to internet.) Soon we will make a notice in our website after

completing development.

2. Connect the AUTO-i 700 to a diagnostic connector on

your car through DLC main cable. If your car supplies power

to AUTO-i 700, PWR light on the front side of the AUTO-i

700 will be turned on. If so, you do not need to connect

power cable.

4. Select a car model.

- Chose a region on the left side to see the region`s car.

- 'Total' shows all car brand in alphabetical order.

- 'Favorite' shows what you saved as a favorite.