Carmanah F Series Manual de instalación - Página 11

Navegue en línea o descargue pdf Manual de instalación para Radar Carmanah F Series. Carmanah F Series 20 páginas. Rrfb mast arm kit
También para Carmanah F Series: Manual de inicio rápido (20 páginas), Manual de instalación (16 páginas), Manual de sustitución del sistema de gestión de la energía (12 páginas), Manual de instalación (20 páginas), Manual del usuario (18 páginas), Manual de sustitución (9 páginas), Manual de instalación (18 páginas)

• Obtain 3" of red wire supplied with the kit and strip both ends to 0.35".

• Insert one end of 3" red wire into PBS+ terminal.

• Route modified AI harness wires (from Steps 2 – 5, violet, blue, black, red and yellow)

into the hole shown.

• Install the wires into the terminals as follows:

Violet 

3-position splice terminal with red wire going to PBS+

Blue

EXT1



Red

Middle BAT+



Black 

Middle BAT−

If the system has a push

button, insert the positive

push button wire into the

empty position of the 3-

position splice terminal.

Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 | [email protected] | carmanah.com

Install AI Harness

Blue

(EXT1)

(PBS+)

Violet and

red (splice

terminal

• Align ends of heatshrink on both harnesses near end of

sheet metal tab.

• Cable tie around both harnesses and sheet metal tab.

APPLIED INFORMATION (AI) INTEGRATION INSTALL GUIDE

Red

(BAT+)

F Series

Black

(BAT−)

Page 11