Carmanah F Series Instal Manual - Halaman 11

Jelajahi secara online atau unduh pdf Instal Manual untuk Radar Carmanah F Series. Carmanah F Series 20 halaman. Rrfb mast arm kit
Juga untuk Carmanah F Series: Panduan Memulai Cepat (20 halaman), Instal Manual (16 halaman), Manual Penggantian Sistem Manajemen Energi (12 halaman), Instal Manual (20 halaman), Panduan Pengguna (18 halaman), Manual Penggantian (9 halaman), Instal Manual (18 halaman)

Halaman Cetak
Carmanah F Series Instal Manual
• Obtain 3" of red wire supplied with the kit and strip both ends to 0.35".
• Insert one end of 3" red wire into PBS+ terminal.
• Route modified AI harness wires (from Steps 2 – 5, violet, blue, black, red and yellow)
into the hole shown.
10
• Install the wires into the terminals as follows:
Violet 
3-position splice terminal with red wire going to PBS+
Blue
EXT1
Red
Middle BAT+
Black 
Middle BAT−
If the system has a push
button, insert the positive
push button wire into the
empty position of the 3-
position splice terminal.
Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 | [email protected] | carmanah.com
Install AI Harness
Blue
(EXT1)
(PBS+)
Violet and
red (splice
terminal
• Align ends of heatshrink on both harnesses near end of
sheet metal tab.
11
• Cable tie around both harnesses and sheet metal tab.
APPLIED INFORMATION (AI) INTEGRATION INSTALL GUIDE
Red
Red
(BAT+)
F Series
Black
(BAT−)
Page 11