Carmanah E Series Manual de instalación - Página 7

Navegue en línea o descargue pdf Manual de instalación para Sistema de seguridad Carmanah E Series. Carmanah E Series 20 páginas. Rrfb mast arm kit
También para Carmanah E Series: Manual de inicio rápido (20 páginas), Manual de instalación (16 páginas), Manual de sustitución del sistema de gestión de la energía (12 páginas), Manual del usuario (18 páginas), Manual de sustitución (9 páginas), Manual de instalación (18 páginas)

Discard

leftover

wire

Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 | [email protected] | carmanah.com

Prepare AI Harness

If the AI Integration Kit was ordered with a

Carmanah E/F system, skip to step 15.

• Obtain AI harness.

• Cut and remove terminals of the five wires shown

(violet, blue, black, red and yellow).

• Leave green wire ring terminal intact (not shown).

• Cut yellow wire to same length as black wire.

• Cut a three-inch section of yellow wire and strip each

end 0.35", for use later.

• Install provided heat-shrink tubing around the five wires

4.25" from end of black wire (other wires will end up

being longer).

• Use heat gun to affix the heat shrink tubing.

• Strip insulation of the five wires 0.35".

APPLIED INFORMATION (AI) INTEGRATION KIT INSTALL GUIDE

E/F Series

4.25"

Page 7