Carmanah F Series Manual de instalación - Página 10

Navegue en línea o descargue pdf Manual de instalación para Sistema de seguridad Carmanah F Series. Carmanah F Series 20 páginas. Rrfb mast arm kit
También para Carmanah F Series: Manual de inicio rápido (20 páginas), Manual de instalación (20 páginas), Manual de instalación (16 páginas), Manual de sustitución del sistema de gestión de la energía (12 páginas), Manual del usuario (18 páginas), Manual de sustitución (9 páginas), Manual de instalación (18 páginas)

• Obtain 3" of red and 3" of black wire supplied with the kit.

• Strip ends of both wires 0.35".

• Use small flat bladed screwdriver to depress each terminal button and insert the wire into the terminal.

• Install one end of the red wire into the left BAT+ terminal.

• Install one end of the black wire into the right BAT− terminal.

• Insert the other end of each wire into two of the 5-position splice terminals.

• Route the two red battery harness wires into the

splice terminal with the red wire from BAT+.

• Route the two black battery harness wires into the

splice terminal with the black wire from BAT−.

Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 | [email protected] | carmanah.com

Install Battery Jumper Wires and Splice Terminals

Make sure all wire strands go into the terminal hole.

APPLIED INFORMATION (AI) INTEGRATION KIT INSTALL GUIDE

Red

wires

E/F Series

Black

wires

Page 10